#  Step 7: Demold 

 



 ##  

  expand\_more  

 
  

 

   ![step7-1.png](/sites/g/files/omnuum4601/files/styles/hwp_1_1__720x720_scale/public/sorotoolkit/files/step7-1.png?itok=f87t4As6) 

 

- Peel off the completed sensor, pulling out the rigid ends first.
- Wait 1 day for rubbers to strengthen before using the sensors.

### Bibliography

Mengüç et al. (2013) [Soft Wearable Motion Sensing Suit for Lower Limb Biomechanics Measurements.](/publications/soft-wearable-motion-sensing-suit-lower-limb-biomechanics-measurements)

Mengüç et al. (To appear in 2014) [Wearable Soft Sensing Suit for Human Gait Measurement.](/publications/wearable-soft-sensing-suit-human-gait-measurement)

Miserez et al. (2008) [The Transition from Stiff to Compliant Materials in Squid Beaks.](/publications/transition-stiff-compliant-materials-squid-beaks)

Muth et al. (2014) [Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers.](/publications/embedded-3d-printing-strain-sensors-within-highly-stretchable-elastomers)

Vogt, D. M., Park, Y. L., & Wood, R. J. (2013). [Design and Characterization of a Soft Multi-Axis Force Sensor Using Embedded Microfluidic Channels.](/publications/design-and-characterization-soft-multi-axis-force-sensor-using-embedded)

### Contributors

Yiğit Mengüç