#  Fabrication 

 



 ##  

  expand\_more  

 
  

 

In this section, we will present the fabrication of a single actuation module. The actuation module is composed of four main components: the source code of the running mechanism, the main electronics circuitry, the tendon and pulley mechanism, and the covering container box. Follow the steps in this section to learn how to build all of these components.

Sort ![final_0](/sites/g/files/omnuum4601/files/2024-11/final_0.jpg)

 



 ![finalbox](/sites/g/files/omnuum4601/files/2024-11/finalbox.jpg)

 



The main circuitry inside the actuation module

The complete box with the electronics and tendon mechanism inside.





### Bibliography

Wang et al. (2012) [Physical Connection and Disconnection Based on Hot Melt Adhesives](/publications/physical-connection-and-disconnection-control-based-hot-melt-adhesives)

Wang et al. (2013) [Large-Payload Climbing in Complex Vertical Environments Using Thermoplastic Adhesive Bonds](/publications/large-payload-climbing-complex-vertical-environments-using-thermoplastic)

Nurzaman et al. (2013) [Active Sensing System with In Situ Adjustable Sensor Morphology](/publications/active-sensing-system-situ-adjustable-sensor-morphology)

Yu et al. (2014) [Soft Robotics Education](/publications/soft-robotics-education)

Wang et al. (2014) [Mechanics and energetics in tool manufacture and use: a synthetic approach](/publications/mechanics-and-energetics-tool-manufacture-and-use-synthetic-approach)

### Contributors

Utku Çulha

Fabio Giardina