#  Design 1 

 



 ##  

  expand\_more  

 
  

 

This design is meant to simply demonstrate Pneumatic Deformation Sensors and is designed to be an independent sensor. When the sensor is squeezed, its internal pressure increases to a maximum of 10 PSI. It consists of Ecoflex 00-30 silicone with an internal cavity of 21.5cm3 and a wall thickness of 6mm. The .STLs for the three-part mold are on the [Downloads](/pds/downloads) page and the [Bill of Materials](/pds/fabrication/bom) and the [instructions for building](/pds/fabrication/design-1) can be found on the [Fabrication](/pds/fabrication) page.

   ![fullsizerender_32.jpg](/sites/g/files/omnuum4601/files/styles/hwp_1_1__720x720_scale/public/srt_competition_2016/files/fullsizerender_32.jpg?itok=sJ6rnWKH)