#  Design 2 

 



 ##  

  expand\_more  

 
  

 

This design is meant to show a use-case for Pneumatic Deformation Sensors. It consists of an Ecoflex 00-30 PDS attached to a [PneuNets Bending Actuator](/book/pneunets-bending-actuator). When the actuator is inflated, the sensor is bent, causing its internal pressure to increase up to 2 PSI. The sensor itself has an internal volume of 8.2cm3. The .STL for the mold are on the [Downloads](/pds/downloads) page and the [Bill of Materials](/pds/fabrication/bom) and the [instructions for building](/pds/fabrication/design-2) can be found on the [Fabrication](/pds/fabrication) page.

   ![fullsizerender_33.jpg](/sites/g/files/omnuum4601/files/styles/hwp_1_1__960x960_scale/public/srt_competition_2016/files/fullsizerender_33.jpg?itok=M7XxGlOT)