#  Fabrication 

 



 ##  

  expand\_more  

 
  

 

This section will discuss what is needed and how to build both Pneumatic Deformation Sensors. The following page has a [bill of materials](/pds/fabrication/bom) for sensor [designs 1](/pds/design/design-1) and [2](/pds/design/design-2) and both breadboard and soldered versions of [the circuit](/pds/design/electronics). The pages after that has step-by-step instructions for building all of the previously mentioned things.

   ![fullsizerender_26.jpg](/sites/g/files/omnuum4601/files/styles/hwp_1_1__960x960_scale/public/srt_competition_2016/files/fullsizerender_26.jpg?itok=h-BT1wC6) 

 

The instructions for the circuits will require knowledge of reading a circuit diagrams and soldering skills. Tutorials for said things can be found [here](https://learn.adafruit.com/adafruit-guide-excellent-soldering/tools) and [here](http://makezine.com/2011/11/15/collins-lab-schematics/).