Final Assembly

1.  Follow Handle instructions to build handle
2. Follow Arm instructions to build arm
3. Follow Gripper instructions to assemble gripper
4. Test gripper.
5. Connect the arm tube to the handle tube.
6.  Connect the arm to the handle.
7.  Shorten the arm tube if it is too long
8.  Connect the gripper to the arm tube, the connecting cylinder will hold it a little.
9.  Use the double sided tape to attach the gripper to the arm.(glue and tape don’t stick to the ecoflex)                                                                      
10.  Add magnets to the center of the gripper on the tape.
11.  Test full grabber reacher
12.  Make Revisions