1) 3D-Printing

STL files for the 3d-printed parts can be found in the Downloads section for printing, along with Solidworks CAD files for easy modifications.

Note that these parts (specifically the tip, ring and body) need to be printed in a high precision (resolution below 0.1 mm) printer such as the Stratasys Fortus 450mc. All parts are printed in VeroWhite material.







Ring + Plug    




Camera mount


Once the parts have been printed, check all holes to ensure they are clear of support material. If necessary use a thin screwdriver to clear them. Then screw the base and mount parts together using the M3 screws as shown.

Body being screwed to mount